Title: SP Flash Tool Linux [Print this page]

Author: wiz.wiz    Time: 2016-08-15 15:52
Title: SP Flash Tool Linux
Edited by wiz.wiz at 2016-08-31 05:14

Topic for linux users.
I propose to update this topic based on my progress (if any) and other users feedback.

* Using virtualbox (winxp) :
- followed steps on this post : ... =981&extra=page%3D1
=> the Windows vbox won't detect the phone

* found a SP flash tool for linux SW + procedure :
Edit 2016-08-30 : used the SP Flash Tool for Linux below and was able to flash.

- tested the description on this page : ... P-Flash-Tool-UBUNTU

getting the following status:
QThread::setPriority: Cannot set priority, thread is not running
QObject::moveToThread: Cannot move objects with a parent
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms





vid is 0e8d

device vid = 0e8d

pid is 2000

device pid = 2000

com portName is: /dev/ttyACM0

Total wait time = -1471247006.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
DA Connected
executing DADownloadAll...
Erreur de segmentation (core dumped)

=> Ending up with a core dump.

When starting the recovery I see a "no command" message with the android logo.
Using description here : ... 6orderby%3Dlastpost
I can access the regular recovery.

In vacation now, I won't be very quick in checking/testing/answering.

Author: wiz.wiz    Time: 2016-08-31 05:15
this version worked :

Welcome to Vernee ( Powered by Discuz! X3.2