Open the left

How To Replace the IMEI numbers in MTK DEVICES

[Copy link]
ghost45 Post time 2018-02-21 03:12:58 | Show all posts |Read mode
Edited by ghost45 at 2018-02-21 03:33

How To Replace the IMEI numbers in MTK DEVICES

Attention PLEASE !!!
READ CAREFULLY !!!

These procedures are illegal in several Countries and all of you follow these procedures only to replace YOUR ORIGINAL IMEI

The Original IMEI are in the label in your Original Vernee Device Box.

The following 5 procedures describe the several methods to replace your Original IMEI in your Device

__________________________________________________________

1) Way

First way to replace the IMEI from this Guide to replace from backup of your file Nvram.
(This procedure need one previous backup file to replace)
Link:
Zopo NVRAM Partition Backup



If you Don't Have made previously the nvram backup file continue to read the others ways to replace the imei numbers...---->




2) Way
Second way to replace the IMEI from this followed instructions guide to replace from your IMEI numbers.


Test for your imei numbers:

In dial menu write the command:  *#06#
Look here if you have your Imei numbers
and if they are the same of the numbers in the original Label in your Original Vernee Device Box



Procedure to Replace :

1) In dial menu write the command:  *#*#3646633#*#*
2) enter in:
-> Connectivity menu ...
-> CDS information menu ...
-> Radio information menu ...
-> Phone 1 (IMEI n.1) ...
here you will write this command: AT+ -->at this point will arrive you in your screen one menu with several commands so you will select the command:

AT+EGMR=1,17""
Between the two "" write correctly your imei numbers from the original Zopo Device Box

AT+EGMR=1,17
"Write here your imei numbers"
for example :
AT+EGMR=1,17"123456789012344"
and push on SEND AT COMMAND
wait for answer (the command was sent)
and Reboot the device.



AFTER REBOOTING ....


1) In dial menu write the command:  *#*#3646633#*#*
2) enter in:
-> Connectivity menu ...
-> CDS information menu ...
-> Radio information menu ...
-> Phone 2 (IMEI n.2) ...
here you will write this command: AT+ -->at this point will arrive you in your screen one menu with several commands so you will select the command:
AT+EGMR=1,10""
Between the two "" write correctly your imei2 numbers from the original Vernee Device Box

AT+EGMR=1,10"Write here your imei2 numbers"
for example :
AT+EGMR=1,10"123456789012344"
and push on SEND AT COMMAND
wait for answer (the command was sent)
and Reboot the device.

Video


ATTENTION PLEASE:
Solution to the error :

THIS COMMAND IS NOT ALLOWED IN USERBUILD

After the command
AT+EGMR=1,17""
or
AT+EGMR=1,10""
is possible that need one space from the AT command
so probably in your device you MUST write :
space _
AT_+EGMR=1,17""
or
AT_+EGMR=1,10""


Test for your imei numbers:

In dial menu write the command:  *#06#
Look here if you have your Imei numbers
and if they are the same of the numbers in the original Label in your Original Vernee Device Box





3) Way
Third way to replace the IMEI from this followed instructions guide to replace from your IMEI numbers.

Procedure:
1) In dial menu write the command:  *#write IMEI1 numbers here#6666#
2)
In dial menu write the command:  *#write IMEI2 numbers here#7777#





4) Way
Four way to replace the IMEI from this followed instructions guide to replace from your IMEI numbers.
Procedure:
In dial menu write the command:  *#4634#
And immediatly after will apper this secret menu:



5) Way
Five way to replace the IMEI from this followed instructions guide to replace from your IMEI numbers from Maui Meta MTK Application.

Procedure:
1)Download Maui meta (ver. 9.17.24 )app from the follow link:https://www.needrom.com/wp-content/uploads/2017/07/MauiMETA-v9.1724.0.00.rar
2) install the drivers for recognize correctly your device download the drivers from the follow link:
https://mega.nz/#!D4MnFBCZ!pb-v5EeRixWXb-NRzoi2fZuaYYkclM36-1QisVyBag4

3)Run the maui meta application and push reconnect button...and reboot your device



4) ....wait for recognized device...turn on power button if your device will not recognize ...and wait

5) to this point select imei download:

6)Now select the Change NVRAm Database file ...and look for the BPL files...
BPLGUInfoCustomAppSrcP_MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V79_P27_1_lwg_n
that is located into the firmware Original folder database:

7) and wait for the maui meta application recognize the instructions inside that file....
after will appear the 2 imei number box where is possible to rewrite the Original Imei numbers that is located in your Original Device Box...



8) Now you are able to rewrite the correct IMEI numbers in sim 1&2 box with your Original Imei Numbers...
9)After retyping the correct make Download to The Flash button.....wait
10) Make disconnect buttons and the device will reboot...
11) Check your imei numbers in dial section with *#06#

Quick navigation :
Report your problem of using vernee smartphone here
THOR BUG phone posts
TipsForum community will not offer after sale service . any after sale service request, please contact the reseller for immediate help .Thanks.
Reply

Use magic Report

tcs2247 Post time 2018-06-15 22:02:39 From the mobile phone | Show all posts
can u provide me database file from your vernee mix 2, 4 gb
Quick navigation :
Report your problem of using vernee smartphone here
THOR BUG phone posts
TipsForum community will not offer after sale service . any after sale service request, please contact the reseller for immediate help .Thanks.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules